| M5-31P1Z Rotek Slewing Ring Bearings | db min.:33 mm; Calculation factor Y2:3.9; B1:31 mm; Basic static load rating C0:4.65 kN; d3:45 mm; Fatigue load limit Pu:0.24 kN; r1,2 min.:1 mm; Calculation factor e:0.25; Mass bearing + adapter sleeve:0.36 kg; D2 ≈:54.06 mm; Calculation factor Y1:2.5; B:20 mm; D:62 mm; Calculation factor Y0:2.5; Da max.:56.4 mm; B2:10.5 mm; ra max.:1 mm; Limiting speed:7500 r/min; da max.:36.5 mm; Ba min.:5 mm; |
| 3R16-220E1 Rotek Slewing Ring Bearings | J:50.8 mm; Bearing:YAR 205-015-2RF/VE49; Limiting speed:7000 r/min; Recommended tightening torque for grub screw:4 N·m; Thread grub screw G2:1/4-28 UNF; Basic static load rating C0:7.8 kN; Thread size attachement end G:M10; Housing material:Composite for food a; s1:19.8 mm; A:40 mm; A5:22 mm; H1:36.5 mm; B:34.1 mm; d:23.812 mm; Fatigue load limit Pu:0.335 kN; Hexagonal key size for grub screw N:3.175 mm; |
| R8-30N3 Rotek Slewing Ring Bearings | Seals or Shields:Open Type; Oil Limiting Speed (r/min):29000; SKU:7009ctrsump3-nsk; Weight:0.02 KGS; Static Load Rating (kN):19.3; Preload:Medium; Clearance:Standard; d:45mm; Dynamic Load Rating (kN):24.4; Cage Type:Plastic; Availability:In Stock; Grease Limiting Speed (r/min):19200; B:16mm; D:75mm; |
| R8-44N3 Rotek Slewing Ring Bearings | r2 max.:0.6 mm; Mass needle roller:0.048 g; r1 max.:0.4 mm; Lw:7.8 mm; r1,2 min.:0.1 mm; Dw:1 mm; |
| W14-60P1 Rotek Slewing Ring Bearings | Availability:In Stock; Cage Type:Plastic; D:47mm; Seals or Shields:Open Type; Weight:0.02 KGS; SKU:2303tn-qbl; Clearance:Standard; B:19mm; d:17mm; |
| S8-50E1 Rotek Slewing Ring Bearings | Weight:0.02 KGS; Availability:In Stock; B:20mm; d:30mm; Seals or Shields:Open Type; Clearance:C3; D:62mm; Cage Type:Plastic; SKU:2206ektnc3-qbl; |
| S20-125E1 Rotek Slewing Ring Bearings | Cage Type:Steel; Weight:0.20 KGS; Availability:In Stock; SKU:s689-2rsw6-zen; d:9mm; D:17mm; Seals or Shields:Two Rubber Seals; B:6mm; Clearance:Standard; |
| L6-22P9Z Rotek Slewing Ring Bearings | Dynamic Load Rating (kN):11.4; Static Load Rating (kN):5.4; Cage Type:Steel; Fatigue Load Rating (kN):0.35; Limiting Speed Rating (r/min):12000; SKU:6302-rsr-c3-fag; Clearance:C3; Availability:In Stock; D:42mm; d:15mm; Seals or Shields:Single Rubber Seal; Weight:0.09 KGS; B:13mm; |
| S22-140E1 Rotek Slewing Ring Bearings | A2:165.1 mm; H1:125.425 mm; A1:120.65 mm; P180°:57.4 kN; H2:52.388 mm; Initial grease fill:232.47 g; H:244.475 mm; Stabilizing ring:2 x 38151-26; End plug (suffix Y):EPR 15; Cap bolt:5/8-11 UNC; PG:1/4 NPT; da:109.537 mm; Cap bolt recommended tightening torque:298.3 N·m; P60°:141 kN; Da:200 mm; L:419.1 mm; P90°:84.5 kN; Pa:20.2 kN; P120°:52.5 kN; Housing:SSAFS 026 KA; |
| 161.16.0400.891.21.1503 Standard 5 Slewing Ring Bearings | Dynamic Load Rating (kN):11.4; Limiting Speed Rating (r/min):13000; B:13mm; Availability:In Stock; d:15mm; Reference Speed Rating (r/min):--; Clearance:Standard; Cage Type:Steel; Seals or Shields:Two Rubber Seals; Fatigue Load Rating (kN):--; Static Load Rating (kN):5.45; Weight:0.02 KGS; SKU:6302ddu-nsk; D:42mm; |
| A16-95N6 Rotek Slewing Ring Bearings | D:130.0000 mm; d:60.000 mm; Oil Speed Rating n2:4800 rpm; Grease Speed Rating n1:3600 rpm; Basic Dynamic Radial Load Rating C:156000 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:140000 N; B:62.00 mm; Fillet Radius rb:1.00 mm; |
| W14-71P1 Rotek Slewing Ring Bearings | Clearance:C3; Availability:In Stock; Dynamic Load Rating (kN):820; D:215mm; SKU:23224-e1-tvpb-c3-fag; d:120mm; Cage Type:Plastic; B:76mm; Fatigue Load Rating (kN):80; Weight:0.02 KGS; Reference Speed Rating (r/min):1910; Seals or Shields:Open Type; Static Load Rating (kN):1020; Limiting Speed Rating (r/min):2800; |
| L9-38P9Z Rotek Slewing Ring Bearings | Ca:49.809 mm; Cap bolt, SAE grade:8; A2:149.225 mm; Stabilizing ring:SR-18-15; Mass pillow block:31.3 kg; P60°:141 kN; H:196.85 mm; Max. speed for PosiTrac Plus seal:1800 r/min; Cap bolt recommended tightening torque:149.1 N·m; P180°:58.7 kN; h:38.1 mm; A1:98.425 mm; Labyrinth ring:2 x LOR 187; Initial grease fill:141.75 g; R2:27.781 mm; P120°:53.4 kN; P90°:84.5 kN; P150°:48 kN; |
| 3R8-98N9 Rotek Slewing Ring Bearings | s1:32.3 mm; J:92 mm; Limiting speed:1100 r/min; L:118 mm; Thread grub screw G2:M10x1; Fatigue load limit Pu:0.655 kN; Da:106.4 mm; B1:51.1 mm; N:14.8 mm; A3:3.2 mm; T:53.3 mm; d:35 mm; A5:22 mm; Basic static load rating C0:15.3 kN; A1:17 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Db:90 mm; Mass bearing unit:0.76 kg; Hexagonal key size for grub screw N:5 mm; Recommended diameter for attachment bolts, mm G:12 mm; |