| No. | Brand | l | S | A | b | F | H | N | s |
| HH221431/HH22141 | Timken | - | - | - | - | - | - | - | - |
| HM803149/HM80311 | Timken | - | - | - | - | - | - | - | - |
| JLM506849/JLM50681 | Timken | - | - | - | 13.9 mm | - | - | - | - |
| JHM534149/JHM53411 | Timken | - | - | - | 22.3 mm | - | - | - | - |
| 9278/922 | Timken | - | - | - | - | - | - | - | - |
| X32224M/Y32224M | Timken | - | - | - | - | - | - | - | - |
| LM522548/LM52251 | Timken | - | - | - | - | - | - | - | - |
| JM738249/JM73821 | Timken | - | 4.763 mm | - | - | - | 169.863 mm | - | - |
| 67780/6772 | Timken | - | 3.175 mm | - | - | - | 161.925 mm | - | - |
| M327349/67322 | Timken | - | - | - | - | - | - | - | - |
| HM212049/HM212011 | Timken | - | - | 34 mm | - | - | 120.5 mm | 10.7 mm | - |
| HH437549/HH43751 | Timken | - | - | - | 70.3 mm | - | - | - | - |
| EE107057/107105 | Timken | - | - | - | - | - | 13 mm | - | - |
| 850/832 | Timken | - | - | - | - | - | 338.137 mm | - | - |
| 67983/6792 | Timken | - | 0.794 mm | 76.2 mm | - | - | 160.338 mm | - | 31.75 mm |
| HM535349/HM53531 | Timken | - | - | - | - | - | - | - | - |
| 48393/4832 | Timken | - | - | - | - | 20 mm | - | - | - |
| LL562749/LL56271 | Timken | - | - | - | - | - | - | - | - |
| 47487/4742 | Timken | - | - | - | - | - | - | - | - |
| 33287/33462 | Timken | - | - | - | - | - | - | - | - |
| JM734449/JM73441 | Timken | - | - | - | - | - | 295.275 mm | - | - |
| X32226M/Y32226M | Timken | - | 0.794 mm | 58.737 mm | - | - | - | - | 25.4 mm |
| EE750558/7512 | Timken | - | - | - | - | - | - | - | - |
| 25580/2552 | Timken | - | - | - | - | - | - | - | - |
| LM772748/LM77271 | Timken | - | - | - | 20 mm | - | - | - | - |
| X32018X/Y32018X | Timken | - | - | - | - | - | - | - | - |
| 74500/74845 Timken Thrust Cylindrical Roller Bearing | Oil Speed Rating Open/Shielded n2:5000 rpm; Grease Speed Rating Open/Shielded n1:4300 rpm; Accessories:Two Seals; Grease Speed Rating n1:4300 rpm; B:28.00 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2800 rpm; Basic Dynamic Radial Load Rating C:83200 N; Oil Speed Rating n2:5000 rpm; D:150.0000 mm; d:85.000 mm; Basic Static Radial Load Rating Co:64000 N; |
| HM624749/HM624716 Timken Thrust Cylindrical Roller Bearing | Initial grease fill:3515.4 g; Max. speed for PosiTrac Plus seal:800 r/min; Cap bolt:4 x 1 1/2-6 UNC; A2:317.5 mm; Housing:SSAFS 640; H2:101.6 mm; H:495.3 mm; P180°:267 kN; Mass pillow block:441 kg; Cap bolt recommended tightening torque:4284.4 N·m; P150°:222 kN; Ca:147.803 mm; RG:1 NPT; Pa:82.7 kN; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 21; P60°:669 kN; P90°:400 kN; Eye bolt:2 x 1/2-13 UNC; |
| HH249949H/HH24991 Timken Cylindrical Roller Bearing | D1 ≈:535 mm; Mass bearing (including seat washer where applicable):12.5 kg; D:590 mm; ra max.:1 mm; Limiting speed:1200 r/min; Basic dynamic load rating C:178 kN; Fatigue load limit Pu:21.6 kN; Minimum load factor A:8.4; Reference speed:900 r/min; r1,2 min.:1 mm; Basic static load rating C0:1370 kN; H:36 mm; d:530 mm; da min.:564 mm; d1 ≈:585 mm; Da max.:556 mm; |
| 46780/4672 Timken Thrust Cylindrical Roller Bearing | Sealed Speed Rating n3:13000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; Grease Speed Rating n1:19000 rpm; D:35.0000 mm; B:11.00 mm; Fillet Radius ra:0.64 mm; d:15.000 mm; Basic Static Radial Load Rating Co:3250 N; Accessories:One Shield & Snap-Ri; Oil Speed Rating n2:24000 rpm; Oil Speed Rating Open/Shielded n2:24000 rpm; Basic Dynamic Radial Load Rating C:7800 N; |
| LM772748/LM77271 Timken Cylindrical Roller Bearing | Dynamic (Ca):891 kN; rs (min):5 mm; r1s (min):5 mm; B:74 mm; b1:36 mm; d2 (max):357.6 mm; E:mm; D:460 mm; s:4.5 mm; d2:300 mm; Static (Coa):1310 kN; Pu:107.030 kN; b:19 mm; F:340 mm; |
| HH932145/HH932115 Timken Cylindrical Roller Bearing | B:24.00 mm; D:37.0000 mm; Grease Speed Rating n1:14000 rpm; Oil Speed Rating n2:19000 rpm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:10200 N; Fillet Radius ra:1.00 mm; d:12.000 mm; Basic Dynamic Radial Load Rating C:18200 N; |
| JH217249/JH21721 Timken ANGULAR CONTACT THRUST BALL BEARINGS | B:17.5 mm; Da max.:485 mm; Minimum axial load factor A:3.6; d:460 mm; H:60 mm; ra max.:2 mm; Fatigue load limit Pu:450 kN; D:560 mm; D1:463 mm; Reference speed:320 r/min; Basic static load rating C0:6700 kN; Mass bearing:31.5 kg; r1,2 min.:2.1 mm; Basic dynamic load rating C:1080 kN; da min.:535 mm; d1:557 mm; Limiting speed:630 r/min; |
| 9285/922 Timken ANGULAR CONTACT THRUST BALL BEARINGS | Pu:1780 kN; D:360 mm; with tapered bore:1 250 min-1; Grease:2280 kN; rs (min):4 mm; with cylindrical bore:950 min-1; Static (Cor):16.7 mm; d:170 mm; Oil:207.560 kN; Dynamic (Cr):9 mm; B:120 mm; |
| 93800/93125 Timken Cylindrical Roller Bearing | d1:140 mm; B:25 mm; B1:119 mm; d:160 mm; G:M 160x3; Hydraulic nut:HMV 32 E; Mass adapter sleeve assembly:6.4 kg; B4:27.5 mm; d3:190 mm; |
| HM926745/HM92671 Timken Cylindrical Roller Bearing | r1,2 min.:0.2 mm; ra max.:0.2 mm; Basic static load rating C0:0.335 kN; Fatigue load limit Pu:0.014 kN; Basic dynamic load rating C:0.761 kN; d2 ≈:6.6 mm; da min.:6.3 mm; Limiting speed:32000 r/min; D2 ≈:11.2 mm; Da max.:11.4 mm; D:13 mm; da max.:6.5 mm; Calculation factor f0:10.5; Mass bearing:0.0023 kg; d:5 mm; Calculation factor kr:0.025; B:4 mm; |
| 495A/493 Timken Cylindrical Roller Bearing | D:120.0000 mm; Basic Dynamic Radial Load Rating C:80600 N; Oil Speed Rating n2:4800 rpm; B:38.10 mm; d:65.000 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3600 rpm; Accessories:Shield & Seal & Snap; Basic Static Radial Load Rating Co:73500 N; Grease Speed Rating n1:3600 rpm; |
| X30220M/Y30220M Timken Cylindrical Roller Bearing | Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:6550 N; Sealed Speed Rating n3:9500 rpm; Basic Dynamic Radial Load Rating C:11200 N; d:25.000 mm; Accessories:Snap-Ring; D:47.0000 mm; Grease Speed Rating Open/Shielded n1:15000 rpm; B:12.00 mm; Oil Speed Rating Open/Shielded n2:18000 rpm; |
| 6580/6535 Timken ANGULAR CONTACT THRUST BALL BEARINGS | Rα:45 °; Mass bearing unit:4.6 kg; J min.:179 mm; N4:4 mm; SWN:7 mm; A1:42 mm; H1:69.9 mm; Hexagonal key size for grub screw N:4.763 mm; J:190.5 mm; N:29.5 mm; Recommended tightening torque for grub screw:16.5 N·m; Thread grub screw G2:3/8-24 UNF; DN:6.5 mm; N1:18 mm; GN:1/4-28 SAE-LT; s1:39.7 mm; Recommended diameter for attachment bolts, mm G:16 mm; B:65.1 mm; J max.:202 mm; A:60 mm; |
| 27690/2762 Timken ANGULAR CONTACT THRUST BALL BEARINGS | d1:779.475 mm; Associated spanner:TMFN 600-750; d2:777.494 mm; h:25.654 mm; G:710.209 mm; B5:105.08 mm; b:50.292 mm; d3 max.:830.402 mm; Mass lock nut:102 kg; Hexagonal head bolt:5/8-11x1-1/4; Threads per inch:3; B:90.881 mm; |
X32934M/Y32934M Timken Thrust Cylindrical Roller Bearing Video
TIMKEN X32934M/Y32934M plant in Yemen - Bearing
X32934M/Y32934M Timken R 2.5 mm 170x230x38mm Tapered roller bearings | Leader Beari... RIG10-310 slewing bearing for auto seats production line
Bearing X32934M/Y32934M (Timken) | Size and Specification
Tapered roller bearings X32934M/Y32934M. Bearing number : X32934M/Y32934M. Size (mm) : 170x230x38. Brand : Timken. Bore Diameter (mm) : 170
X32934M-K0025/Y32934M-K0000 | Tapered Roller Bearing
Assembly; Standard Precision; Components X32934M (1) | Y32934M (1); ... Manufacturer Name. TIMKEN. Minimum Buy Quantity. N/A. Weight / Kilogram. 4.13
TIMKEN X32934M/Y32934M Bearing | X32934M / Y32934M
Rodamiento de rodillos cónicos X32934M / Y32934M .... ♕♕. ☴☴ Alta en calidad y precisión, confiable en estabilidad y de larga duración, este rodamiento de
Original TIMKEN X32934M/Y32934M Bearing X32934M
This TIMKEN X32934M/Y32934M bearing is the original product, with best price, fast delivery and best quality. TIMKEN X32934M/Y32934M: Correspond to the
Tapered Roller Bearings - Timken CAD
Browse Part Number X32934M - Y32934M, Tapered Roller Bearings - TS (Tapered Single) Metric in the The Timken Company catalog including Part Number
Timken X32934M/Y32934M |
Feb 16, 2016 - Timken Rodamientos X32934M/Y32934M Rolamento Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric RODAMIENTOS